Panel fencing (lap and waney-edge)
The most common UK domestic fencing — fitted into concrete or timber posts with proper post caps and gravel boards.
Fencing & Gates
Strong, Square Fencingand Bespoke Gates —Built to Last, Not Just to Look New.
Timber panel fencing, close-board fencing, post-and-rail and fully bespoke gates. Properly concreted posts, properly graded timber, properly square — every panel.
Fully insured · Treated timber · Most jobs complete in 1–3 days
15+
Years on the tools
100+
Projects delivered
5★
Bark client rating
1 Day
Quote turnaround
Family
Run since 2016
Service Overview
Why most garden fences sag and lean within five years — and how to build one that doesn't.
Fencing looks simple. The reasons most garden fences sag, lean or blow over within five years are also simple: undersized or under-treated posts, posts not concreted properly, panels nailed straight to posts, and cheap timber that absorbs water like a sponge. Get the basics right and a fence stands square for 20 years.
Ridgeline uses pressure-treated structural timber posts (or concrete posts where preferred), set in correctly mixed post-mix or wet-mixed concrete to proper depths. Panels are fitted into post slots or onto secure brackets — never just nailed flat to the post.
For close-board and bespoke designs, we use individually fixed feather-edge boards on arris rails, allowing single boards to be replaced over time without rebuilding the panel. For gates, we build full-frame braced timber gates with proper hinges, fall-bolts and drop-bolts engineered to the gate's weight.
Whether you need a single panel replaced or a full perimeter and bespoke driveway gates, we build to the same standard.
The cost of getting it wrong
What goes wrong when fencing is rushed.
Fencing isn't difficult — but it's easy to do badly. Cheap installs are rebuilds within five years.
Posts rotting at ground level
Untreated or under-treated posts rot at the soil interface, then snap in the first big wind.
Inadequate concrete
Posts set too shallow or with too little concrete lever out under wind load.
Panels nailed direct to posts
Panels can't move with seasonal expansion, and a single broken panel means rebuilding the run.
Misaligned gates
Gates hung on under-spec hinges, or onto twisted posts, won't close or latch within a year.
Mismatched panel heights
Lazy installs ignore ground levels — the run looks visibly stepped or wavy from day one.
Our Process
A clear, step-by-step system from first call to final handover.
- 01
Free Site Visit
Measure the run, discuss style, height and gates, identify ground conditions.
- 02
Fixed Quote
Itemised written quotation including materials, posts, concrete, gates and disposal.
- 03
Strip & Set Out
Old fencing removed and disposed; new run set out square to existing structures.
- 04
Posts & Panels
Posts set to proper depth and concreted; panels or boards fitted into slots or onto rails.
- 05
Gates & Finish
Gates hung level and tested; site cleared.
The Benefits
What you actually get when Ridgeline delivers your project.
Pressure-treated timber
Posts and rails treated for ground contact — typical 15–25 year working life.
Properly concreted posts
Posts set to correct depth in correctly mixed concrete — no leaning, no levering out.
Fast install
Most domestic fencing runs complete in 1–3 days.
Square, plumb, level
Set out properly so the run reads clean and level — not stepped or wavy.
Bespoke gates
Properly braced timber gates with engineer-spec hinges that close and latch first time, every time.
Built once, not twice
A properly built fence lasts 15–25 years. Cheap fencing is a rebuild every 5–7.
Recent Work
Real fencing & gates projects, photographed on site.
Every photo below is from a Ridgeline project — no stock imagery, no staged shots.
In detail
Panel, close-board, post-and-rail and bespoke — every fencing type, done right.
Fencing styles vary by garden, taste and use. Here's the work we do most often.
Close-board fencing
Individual feather-edge boards fixed to arris rails between posts. Stronger, more secure, longer-lasting and easier to repair than panel fencing.
Post-and-rail fencing
Open agricultural-style fencing for paddocks, large gardens and rural properties.
Bespoke gates
Full-frame braced timber gates from single pedestrian gates up to large twin driveway gates. Proper hinges, fall-bolts, drop-bolts and locks.
Concrete posts and gravel boards
For maximum lifespan and easy panel replacement over time, concrete posts and gravel boards are an excellent choice — no rot at ground level, ever.
Disposal of old fencing
Old fencing stripped, loaded and removed responsibly. Site left clean.
FAQs
Honest answers about your fencing & gates project.
Can't see your question? Call Alex directly on 07368 183733 or request a free estimate.
How much does fencing cost?+
Standard panel fencing typically costs £80–£140 per metre supplied and fitted, depending on style and post type. Close-board runs more. Bespoke gates from £400 for pedestrian to £2,500+ for double driveway gates. Every quote is fixed and itemised.
How long does fencing take to install?+
Most domestic runs complete in 1–3 days. Larger jobs and bespoke gates can take longer.
Do you remove the old fence?+
Yes. Strip-out and disposal of old fencing is included in every quote.
How long will the new fence last?+
Pressure-treated timber fencing typically lasts 15–25 years. Concrete-posted fencing with treated panels can exceed 25 years. Gates last 15–20 years with normal maintenance.
Do I need planning permission?+
Front boundary fencing above 1m and rear/side fencing above 2m typically requires planning permission. We'll confirm on the free site visit.
Whose fence is it?+
Boundary ownership is usually shown on title deeds. Where ownership is unclear, we'll advise on the most common conventions and recommend confirming with neighbours before work.
Can you match an existing fence style?+
Yes. We'll match panel style, height and post type wherever possible for a consistent boundary.
Do you supply concrete posts?+
Yes. Concrete posts and gravel boards are an excellent option for long-lasting low-maintenance fencing — typically priced as an upgrade option in your quote.
Can you build security gates?+
Yes. Pedestrian and driveway gates with proper locks, drop-bolts and hinges. We can also coordinate automated gate systems with specialist gate-automation installers.
How do I get started?+
Call 07368 183733 or request a free site visit. We'll measure, discuss options and have a fixed quote back within a few days.
Related services
Other ways Ridgeline can help.
Ready to start your fencing & gates project?
Speak directly with Alex — the owner — for a free, no-obligation estimate. Most quotes returned within one working day.
ridgelinersc@gmail.com